83
EN
26.2 Menu 9.2 - Configuring the motor running time
1.
Open menu
9.2
.
Measuring the running time directly with the Troll Comfort DuoFern:
2.
Press the button until the roller shutter
stops at the lower end point.
3.
Press the button until the roller shutter stops
at the upper end point and then release it
again.
The running time has been measured and
stored during the up cycle.
4.
OK
Back to system menu.
Measuring the running time manually:
1.
Fully close the roller shutter.
2.
>>
Subsequently move the roller shutter to the
upper end point and measure the time
required.
3.
Enter and confirm the measured running time
(e.g. 15 sec.) in menu
9.2
.
