background image

 

 

Radar Detector Radenso RC-M

 

FCC Notes

 

This device complies with part 15 of FCC rules: Operation is subject to the following two conditions: (1) This device 
may not cause harmful interference. 
(2) This device must accept any interference received including interference that may cause undesired operation. 

NOTE

: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY 

THE PARTY RESPONSIBLE FOR COMPLIANCE.  
    SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not ocurr in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, wich can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following measures: 

-Reorient or relocate the receiving antenna.

 

-Increase the separation between the equipment and receiver.

 

-Connect the equipment into an outlet on a circuit different from that to which the receiver is  connected.

 

-Consult the dealer or an experienced radio/TV technician for help.

 

Summary of Contents for RC-M

















Reviews: