5
Owner’s Manual:
1015
1784593 Rev AD
ECO 18-0069
July 2020
www.radiaproducts.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015
DO NOT
WARNING
!
DO NOT
attempt to replace any damaged
electrical wire or components. Improper
replacement could result in electric shock and
serious injury. Only a qualified service representative
should attempt to repair or replace any damaged
electrical components.
Review this owner's manual before installing or
operating.
The machine must be properly grounded prior
to use. In the case of an electrical short circuit,
grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
The machine’s power cord has a grounding wire
with an appropriate grounding plug. This plug must
be inserted into an electrical outlet that is properly
installed and grounded according to all local
codes and ordinances.
If you must repair or replace the power cord or plug,
DO NOT
connect the grounding wire to either flat-
blade terminal. The wire with insulation having an
outer surface that is green (with or without yellow
stripes) is the grounding wire.
Check with a qualified electrician if you don’t
completely understand these grounding
instructions, or if you are not sure whether the
machine is properly grounded. DO NOT modify
the plug provided; if it won’t fit in the outlet, have
a proper outlet installed by a qualified electrician.
Disconnect the power cord before servicing,
cleaning, or removing any covers
Follow the lockout/tagout procedures of your
company.
DO NOT
open the door until the machine comes to
a complete stop.
To avoid electric shock, don’t get the timer,
control panel, or wiring wet.
This machine is not explosion proof rated. All
containers must be properly sealed and void of
leaks.
Review product label, Material Safety Data
Sheet, and HMIS rating of materials prior to
mixing to determine potential hazards.
Product safety labels should be inspected
and cleaned periodically to maintain good
legibility. Replace any labels that are no
longer legible.
1.2 Safety Precaution Summary
1.2 Safety Precaution Summary
DO NOT
use solvent-based cleaners or
thinners.
Use in a dry and well-ventilated
environment where dust and flammable
vapors are not present.
Keep the work area free of clutter and
electrical cords.
Avoid extension cords. To minimize the risk of
improper electrical grounding, extension cords
are not recommended. If an extension cord is
unavoidable, consult a qualified electrician
to determine what type of extension cord will
satisfy the grounding, current capacity, and
other requirements of the particular situation.
Use the proper power source. Refer to the
machine data plate on the right side panel or
the section 2.1, Specifications, in this manual.
Keep customers away from the work area.
This machine should be used only by properly
trained individuals.
Clamp the can carefully to ensure that it is
held securely durning the mixing cycle.
Do not operate the machine without a can
installed.
Safety Information, Continued..
WARNING: This product may expose
you to chemicals including DEHP, which
is known to the State of California to
cause cancer. For more information, go to
www.P65Warnings.ca.gov
CAUTION!
