Remote Control Instruction
1. POWER BUTTON
: Turn the heater on / off.
2. DOWN BUTTON
: Decrease temperature, timer and level.
3. UP BUTTON
: Increase temperature, timer and level.
4. LEVEL BUTTON
: Use to adjust the 4 power levels (P1: 800W, P2: 1200W, P3: 1600W, P4:2000W).
Press the Level button and then use the up and down buttons (buttons 2 and 3) to increase or decrease the heating level.
5. TIMER BUTTON
: Use to set the timer from T0-T9, which is the number of hours it will run (T1: 1 hour, T2: 2 hours, T3: 3
hours etc.). T0 will display and then adjust to the number of hours you would like to set, using the up and down buttons(2 and
3).
All Radiance heaters and their remote controls have the same frequency, so it is possible to control several heaters
with just one remote.
Batteries
Flip the backside of your remote control and pull out the battery cover. Insert 2 AAA/ Alkaline type batteries in accordance with
the instructions and polarity of the batteries.
Change the batteries in the same way depicted above.
NOTICE:
1. Pull out the batteries in case of long term disuse to prevent leakage which may impair your remote control.
2. Do not allow water or liquid to get into the remote control.
Troubleshooting
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main fuse is working.
3. Check to see the switch is in the ON position.
Maintenance
Careful and regular maintenance of your heater is recommended as per our instructions so to provide long and efficient
operation of your appliance.
1. Check the filthiness of the Reflector and IR-Filament at least once a month. If necessary, apply cleaning and maintenance
instructions.
2. The number of checks may be increased depending on the amount of dust in the environment.
3. Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In case of deformation,
consult your technical service.
4. Check the Power Cord and Plug visually while cleaning the appliance. In case of deformation, consult your technical
service.
- 4 -
Radiance Infrared Outdoor Heater 2000W
Installation Manual
OUTDOOR HEATING
Button
Function
(Heater Power ON)
Remote Control Functions & Heater LED Response
Turn Heater OFF
Mode dependant decrease for
level, temperature & sleep time
Mode dependant increase for
level, temperature & sleep time
Enable level setting mode
(default start to last level used)
Auto turn off
T0 (off) - T9 (max)
Function
(Heater Power OFF)
Turn Heater ON
Level 1 (min)
Turn Heater ON
Level 4(min)
L 1
Changing up to L4
L 4
Changing Down to L1
L value
T value
Heater
LED DIsplay
1
2
4
3
5
