Radiant, Inc.
2
TECHNICAL SPECIFICATIONS
VENDOR
Radiant Inc.
http://www.dvmd.com
PART NUMBER:
801-004
OPERATING TEMPERATURE RANGE
: 0-60C.
POWER REQUIREMENTS
The DVMD1X will accept 8 to 36VDC or 24VAC. If DC power is shared between devices the
GROUND must be the same for all units. At 12V input the supply must be rated at 1.1 watts or
greater, which is 12V at 100 mA or more.
INTRODUCTION
This is a manual for the installation, setup, and configuration of the DVMD1-X. It contains step-
by-step instructions for connecting the DVMD1-X
in a system.
Please also refer to the XPORT
User Manual to change the IP address and Local Port number for each DVMD1-X.
The minimum DVMD1-X configuration must contain:
•
At least one DVMD1-X and Power Supply
•
The PC program, ManagerNET.ex
e
, to communicate with the DVMD1-X.
•
This User’s Manual.
The user must provide the following:
•
A Windows based computer with NIC card and crossover cable or Hub/Router
•
An 8 to 40 volt power supply (AC or DC)
•
A video camera
•
A CCTV monitor
•
Two 75 ohm coaxial cables with BNC connectors
Any questions or comments regarding the DVMD1-X Hardware User’s Manual should be sent to:
Radiant, Inc.
2395 Kenwood Drive
Boulder, CO 80303
Phone: 303-543-0440
FAX: 303-543-0440
E-mail:
lyle.powers@dvmd.com
