Page2
Installation and Wiring
Carefully separate the front half of the thermostat from the back plate by placing a small
flat head terminal driver into the slots on the bottom face of the thermostat.
Carefully unplug the ribbon connector which is plugged into the front half of the thermostat.
Place the thermostat front half somewhere safe. Terminate the thermostat as shown in the
diagrams below.
Screw the thermostat back plate on to the flush box
Re-connect the thermostat ribbon cable and clip the two halves together.
This product should be installed by
a qualified electrician.
GTS-TH-V Thermostat Instructions
ver 1.0
R e a r V iew
82mm
62mm
60mm
45mm
Press and hold “SCHDL” for 5 seconds to switch between Auto/Manual mode.
Auto / Manual Mode
In Manual mode
（
）
, the thermostat maintains a constant set temperature manually
set by the user.In Auto mode, the thermostat executes the preprogrammed schedules.
Lock the Keypad
To lock the keypad, press and hold the “POWER” button for 5 seconds, you will see a lock
symbol . To unlock, repeat the steps above and the lock symbol will disappear.
Temporary Temperature Override
Press or , the temperature display will start to flash. Use or buttons to adjust.
Press “OK” to accept, and you will see “ ” above the temperature display. Thermostat
will maintain the new set temperature until the next programmed event.
To cancel the override setting, press“RUN SCHDL”.
Setting the clock and day of the week
OVERRIDE
This thermostat is fitted with a real time clock. It is essential that the clock time and
day are set accurately if you require your programmed events to starton time. To set
follow the steps below:
Press “TIME” and the time will start flashing. Use the up and down arrows to set
the time.By holding the arrow down the time will change faster.
Press “NEXT” to move to the Day setting and use the up and down arrows to get
Press “OK” to store and exit.
to the correct day.
1
2
3
Setting the Program Schedules
This thermostat has the ability to program each individual day of the week separately, or program 7 days of the week at once. You can also program weekdays
（
5 days
）
to
one schedule and then weekends (2 days) to a different schedule. See the Menu information for details on how to set this up.(refer to Menu 10)
Program
Start Time
Setpoint
Explanation
1
05:00
Above are default program schedules, to make changes, follow easy steps as below.
23 °C
Set to the time you would like to wake to and the temperature you want during the morning, until you left for the day.
Set to the time you leave home and the temperature you wish your home to maintain while you are away at work perhaps.
Set to the time you return home at end of the day and the temperature you want during evening until bed time.
Set to the time you sleep and the temperature you want overnight
（
usually a comfortable and energy saving temperature
）.
2
08:00
1 6 °C
3
16:30
23 °C
4
21:00
1 6 °C
Use up or down buttons to adjust the day of the week you want to start programming or to the day you wish to edit an existing event / program.
2
（
Press “1-7” to select all 7 days of the week, and to cancel press “1-7” again.
）
Use up or down buttons to adjust the time you wish the Program 1 event to commence for the selected day/days .
4
Use up or down buttons to set the desired temperature to be maintained during Program 1.
6
Press “NEXT” and the LCD screen will show Program 2 with the time display flashing, this signifies that the second daily event is now ready to be programmed.
7
Repeat steps 4,5,6 to set the remaining programs/events, then press “OK” to store and exit.
Hint: During setting programs, press “DEL” will clear a program entry and thermostat will maintain the temperature setpoint of the last executed program
until the beginning of the next program.
WAKE
LEAVE
RETURN
SLEEP
Press “NEXT” and the temperature will start flashing.
5
Press “NEXT” the LCD screen will show PROGRAM 1 and the time will be flashing.
3
Press “ SCHDL” and the day display will start flashing.
（
If your thermostat is set to 5+2 day programmable mode, the programming will skip to step3
）
1
1
2
3
4
5
6
Max 16A
Sensor
L
N
L
AC 230V
N
~
~
