11
HL2-DS
Series
11.75”
* Factory recommended mounting heights are listed as a guideline. If infrared heaters are mounted too
low or too high, they may result in discomfort due to excessive heat or lack of heat. Detroit Radiant
Products Company generally recommends observing the recommended mounting heights to
optimize comfort conditions. However, certain applications such as spot heating, freeze protection,
outdoor patio heating or very high ceilings may result in the heaters being mounted outside of the
factory recommended mounting heights.
Chart 3.1
•
Recommended Mounting Heights and Coverages for HL2-DS Series Heaters
Figure 3.2
•
Mounting Height Dimensions (see Chart 3.1 for dimensions)
Max.
Input
(BTU/h)
Typical or
Recommended
Mounting Height*
Coverage Area
Straight Config.
(LxW)
Distance
Between
Heaters (ft.)
Dim. A
Distance
Between
Heater Rows
Dim. B
Max. Distance
Between
Heaters and
Wall - Dim. C
65,000
9’ - 16’
26’ x 12’
10’ - 20’
20’ - 40’
16’
80,000
9’ - 16’
26’ x 12’
10’ - 20’
20’ - 40’
16’
100,000
9’ - 16’
26’ x 12’
10’ - 20’
20’ - 40’
16’
NOTE:
Dimensions A, B, & C are based upon heaters hung at the factory recommended mounting height.
Dim. C
Dim. A
Dim. A
Dim. B
Dim. C
Figure 3.1
•
Heater Dimensions
9.5”
18.25”
SIDE VIEW
END VIEW
195.5”
3.25”
3.0
Installation
•
Recommended Mounting Heights
59.4”
90.5”
45.6”
