RB8762CJF Designer’s Guide (RRD2Z50‐20190314001‐A09‐C2)
4
RB8762C EVK and BLE Functionality
Radicom provides RB8762C-EVK (development kits) as a quick platform for testing and evaluating
the RB8762C and RB8762CHM Bluetooth modules. The kit includes two RB8762C modules
mounted on the RB8762CHM DIP Module. Each RB8762CHM is installed into a RB8762CMB
evaluation board. One of the RB8762CHM is configured to operate in BLE Data Protocol Master
Mode. The other RB8762C-HM is configured to operate in BLE Data Protocol Slave mode. The
RB8762CMB boards have an RS232 Serial Port connector and USB interface that allows the user to
immediately connect to any standard serial port to evaluate the Bluetooth modules.
The RB8762C modules are defaulted to use the BLE Data Protocol. For BLE Data Protocol operation,
you need one Radicom Master and one Radicom Slave module. The Slave Model RB8762C-S
advertises or broadcasts the Bluetooth signal. The Master Model RB8762C-M will scan for Bluetooth
signals and then request a Bluetooth connection. The RB8762C-S Slave can then accept the
connection for BLE Data transfers. The RB8762C-S Slave can also operate with remote devices that
also support the BLE Data Protocol.