RW8300E-a-PR Quick Guide Draft v.004(02-24-17)
7
Reset RW8300E-a(-NL) (USB-Device) to the Default
This chapter will show you how to reset RW8300E-a-NL and RW8300E-a to the
default settings by
RESET
button.
Figure 9
Buttons position
1 Plug in mini USB cable to power on RW8300, and wait 1 minute for system start up.
2 Reset to default: Insert a pin into the reset hole (near the LAN port), and long press
RESET
button over 5 seconds. RW8300E-a(-NL) (USB-Device) will turn to factory
default setting, and LED will flash within 0.3 seconds. Once system reboots and LED
flashes per 2 seconds, reset successfully.
Reset
WPS
