Radicon J 100 Manual Download

Page: 71 / 76

SERIES J

Mounting of speed reducer

1. The reducer should normally be mounted on a shaft with

tolerance js6. The hollow shaft has tolerance H7. Lift the

reducer in the, for this purpose, suitable hole J11-72 and J100-

190 in the torque arm holes or enclosed lifting ears. Grease

shaft with Molykote BR2 or corresponding before mounting the

speed reducer. The speed reducer must not be forced onto the

shaft.

2. When fitting the V-belt pulley use screw to press it into position

(tapped hole at input shaft is not standard on type J 11-32). V-

belt pulley must not be forced into position with a hammer as

bearings can be damaged. The lock screw for the V-belt pulley

should be countersunk into key and locked into position.

3. The torque arm should be positioned so that it is in tension.

The direction of rotation of output shaft sleeve, should be

determined. In case of counter clockwise rotation. Torque arm

should be positioned to the right (see fig 1). For reversible and/

or heavy duty drives, we recommend two torque arms in

opposite direction.

4. If back stop is fitted, the direction of rotation of the motor

should be checked prior to mounting the V-belt.

5. For applications with heavy duty and/or when speed reducer is

mounted in angle of inclination from horizontal machine shaft,

locking washer must be used.

Picture shows counter clockwise rotation

For J11-J72

• Torque arm

• Locking bolt, locking pin and washers for the torque

arm

• Washer, screw and locking rings (circlips) for the

hollow shaft

• Stop screw for the hollow shaft

• Instructions for installation and maintenance and a

label saying that no oil is filled.

A delivery of a standard Series J shaft mounted speed reducer consists of

Fig 1

MOUNTING INSTRUCTIONS

For J100-J190

• Torque arm

• Locking bolt, locking pin and washers for the

torque arm

• Washer, screw and locking rings (circlips) for the

hollow shaft

• Stop screws in hollow shaft

• Instructions for installation and maintenance and

a label saying that no oil is filled.

0201

Mounting Positions

Column 14 Entries

Output

shaft

Input

shaft

Summary of Contents for J 100













































































Search results

Summary of Contents for J 100

Reviews:

Related manuals for J 100

Brands by name

Popular brands

Radicon J 100, Manual

Search results

Summary of Contents for J 100

Reviews:

Related manuals for J 100

Brands by name

Popular brands