77
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića
- Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
Figure 20. View and explanation of display in option Combustion Power
NOTE: In the Pellet Boiler Heating Stove BIO
lux
14 maximum adjusted power is 3.
(Manufacturer’s recommendation is to use AUTO mode of Power)
Change the assigned temperature of water in the pellet boiler heating stove
Procedure:
Press the key P3
, after that the falling list is shown on the display , where the
first option is automatically marked Combustion Power. With Keys P4 or P6
, you come to the option Boiler Thermostat. Confirm again with key
P3
(appears to view a similar view like on figure 19), then with keys P4 or P6
assign the temperature and at the end confirm again with key P3
.
Go back to the basic view on the display (Figure 17), by pressing the key P1
.
Change the precise time and date.
Procedure:
Press the key P3
, after that on the display there is the falling list, where the first
option is automatically marked Combustion Power. With keys P4 or P6
, you come to the option Time and Date.
