86
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
adjusted power and finally confirm again with key
P3
. Go back to the basic view
of the display (
Figure 16
), by pressing the key
P1
.
Figure 17. View and explanation of display in option Combustion Power
NOTE: In the boiler
BIO
lux
UNI 20
maximum adjusted power is 3.
(Manufacturer’s recommendation is to use AUTO mode of Power)
•
Change the assigned temperature of water in boiler
BIO
lux
UNI 20
Procedure:
Press the key
P3
, after that the falling list is shown on the display , where the
first option is automatically marked
Combustion Power
. With Keys
P4 or P6
, you come to the option
Boiler Thermostat
. Confirm again with key
P3
(appears to view a similar view like on
figure 17
), then with keys
P4 or P6
assign the temperature and at the end confirm again with key
P3
.
Go back to the basic view on the display (
Figure 14
), by pressing the key
P1
.
