51
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
Picture 8. The representation of pellet stove distance from immovable objects
3.4. Installing the CUBA pellet stove to the chimney
While connecting the pellet stove to the chimney, there are two different installation phases:
Installing smoke channels and supplying fresh air for combustion.
Connecting to the chimney.
Installing smoke channels and supplying fresh air for combustion (Pictures 9 and 10):
To connect the water pellet stove to the chimney, special smoke pipes certified for
this purpose have to be used. Materials used to make these pipes are structural and
stainless steel.
The diameter of the smoke pipe has to correspond to the diameter of a chimney on the
external end and that is 80mm. This diameter mustn't be reduced.
The smoke pipe mustn't be used for more devices simultaneously.
During the installation of the smoke pipe, no more than two turns at a 90-degree angle
are allowed. The maximum length of horizontal sections is 2m.
