75
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
Picture 29. The representation of elements being disassembled during cleaning
If condensation appears inside while using the stove, it is necessary to remove it and the
entire stove should be coated from inside with basic cleaners or at least with the aqueous
solution of builders’ lime. That way, the neutralization of acid due to condensation is done.
During service and maintenance of the stove, remove it from the power
supply.
Return the M profile inside the smoke channels, for the purpose of
stable stove operation.
This way, conserve the boiler imperatively at the end of the heating
season. In that situation, close all holes on the stove to avoid air
circulation through the stove because that can result in the appearance
of moisture inside.
Servicing the stove is one of the most important factors for its long
working life. Between two seasons, it is particularly important to clean
the stove and neutralize the acid as described.
