Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
78
Picture 18. LCD 100 Display
Button
Function
P1
Exit menu and submenu;
P2
Ignition and extinguishing (push for 3 seconds), Reset error (push for 3 seconds),
Enable/disable chrono;
P3
Enter in User Menu 1/submenu, Enter in User Menu 2 (push for 3 seconds), Save
data
P4
Enter in Visualizations Menu, Increase
P5
Enable chrono program
P6
Enter in Visualizations Menu, Decrease
Led
Functions
D1
Heating Resistance On
D2
Auger On
D3
Pump On;
D4*
Valve On;
D5
Output V2 On
D6*
Pump 3 active.;
D7*
Engine on auxiliary silo active;
D8
D9**
External Chrono Reached
D10*
Pellet Sensor signalling lack of material;
D11*
Room thermostat reached;
D12*
Domestic Hot Water (DHW) demand
* It is necessary to install additional equipment that is not found in the scope of delivery of the
basic version. For all information, please contact the authorised service technician.
Automation system has a possibility to diagnose obstructions and problems in operation. Automation
system signals any abnormal state via a message on the screen and by undertaking adequate action. The
messages shown on the screen are divided into two groups:
