32
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
Brief instruction on how to use automatic controls
RECHARGING THE FURNACE WITH PELLETS, PREPARING FOR IGNITION
Insert pellets into the silo
The main display has to indicate
OFF
Press and hold the
. While holding the button, the feeder is working and the display is
indicating
LOAD PELLETS
.
STARTING THE IGNITION ON PELLETS, STOPPING THE OPERATION ON PELLETS
Flip the main switch
Press the
button and hold for 4-5 seconds.
Stopping the operation of the boiler on pellets is done by pressing the
and holding it for 4-5 seconds.
CHANGING THE DOSING TIME OF THE FEEDER WHILE IN THE
OPERATING MODE
Press the
button quickly
.If light 1 next to the screw symbol is blinking, press the
, wih
and
change dosing values of the screw to desired and press the SET again
