W
IRELESS
V
OLTAGE
S
ENSOR
C
OPYRIGHT
©
2019,
R
ADIO
B
RIDGE
I
NC
.
W
IRELESS
V
OLTAGE
S
ENSOR
P
AGE
2
OF
13
1.
Q
UICK START
To start using your sensor, simply go to:
https://console.radiobridge.com
From here you can register your device and immediately start receiving messages from the
sensor.
The sensor configuration, message monitoring, and setting up alerts is usually self-explanatory
through the user interface. For further explanations of any sensor features, you may refer to this
user guide
2.
O
VERVIEW
2.1.
Sensor Overview
The wireless sensors designed and manufactured by Radio Bridge provide full sensor to cloud
solutions for Internet of Things (IoT) applications. The voltage sensor uses a 10-bit ADC to
measure an analog value between 0-30V and provides 10mV of resolution. If the measured
value rises above or falls below the configured thresholds, an alert is sent over the wireless
network.
Features include:
•
Built-in radio that talks directly with LoRaWAN wireless networks
•
Two types of tamper detection: enclosure tamper and wall mount tamper
o
Enclosure tamper detects if the packaging of the sensor itself is opened or broken
Available on the RBSx01, RBSx05, and RBSx06 sensors.
o
Wall mount tamper detects if the sensor has been removed from the wall or
mounting point. Available on the RBSx01 and RBSx05 sensors.
•
200,000+ transmissions on a single battery and a 5-10 year battery life depending on usage.
See Battery section for more detail.
•
Fully integrated internal antenna
•
Over the air sensor configuration in the field
•
Automatic low battery reporting and supervisory messages
