10
B
as
ic
O
pe
ra
ti
on
Set Weather Channel Memory
While the radio is on the desired channel, press and hold
M1
to
M5
until
the selected memory indicator (
M1
–
M5
) is displayed. You can store up to five
channels.
To listen to a channel from memory, press
M1–M5
while in weather radio
mode.
Viewing Weather Alerts
You can view the last four different weather alerts received by the radio. When
an alert is received, the alert description scrolls across the display. If multiple
alerts are received, press
or
to view them in order. The first description is
always the newest and descriptions are shown in chronological order. Example:
1)
Flash Flood Watch 0:15
2)
Hurricane Watch 1:15
Receiving Alerts for Specific Areas
When an emergency event happens, the National Weather Service (NWS)
broadcasts a SAME code indicating the affected region along with the alert
signal. You can program your weather radio to alert you for events in up to ten
regions.
1.
Press
MENU,
then press
or
to scroll to
SAME Code
.
2.
Press
or
to select
Multiple
. Press
SELECT
.
.
Press
SELECT
to choose Location #1.
.
Press
SELECT
to choose
Edit By Name
.
5.
Press
or
to choose your state and press
SELECT.
.
Press
or
to choose your county and press
SELECT.
7.
Press
MENU
to return to the location menu.
.
Press
to go to Location #2.
9.
Repeat steps 4 – 8 to program additional locations.
n
Notes:
• If you want to program only one location, choose
Single
at step 2.
• For more information see “
SAME Code”
on page 13 and
“What are FIPS codes
and SAME signals?”
on page 19.
