7
2. Insert the Adaptaplug’s twin connectors
into the adapter cord’s smaller end so it
reads TIP
+
POS.
3. Insert the adapter’s barrel plug into the
radio’s
DC 4.5V
jack.
4. Plug the adapter into a standard AC
outlet (for AC power) or a vehicle’s ciga-
rette-lighter socket (for DC power).
CONNECTING THE
EARPHONE
For private listening, insert the
1
/
8
-inch (3.5
mm) plug of the supplied mono earphone
(stored in the battery compartment) into the
earphone jack on the side of the radio.
Note: Connecting the earphone automatical-
ly disconnects the built-in speaker.
Listening Safely
To protect your hearing, follow these guide-
lines when you use the earphone.
• Do not listen at extremely high volume
levels. Extended, high-volume listening
can lead to permanent hearing loss.
• Set the volume to the lowest setting
before you begin listening. After you
