AM/FM Bike Radio (120-0453) Operation Faxback Doc. # 3675
MOUNTING THE BIKE RADIO
Choose a mounting location on the bike's handlebar where the radio does
not interfere with the bike's operation and the reflector is easily
visible.
1. Use a Philips screwdriver to loosen the mounting bracket's screws
and remove the lower portions of the brackets.
2. Place the mounting bracket on top of the handlebar and the two lower
brackets on the bottom.
3. Hold the two portions together and thread a screw through each of
the holes on the lower brackets, into the mounting bracket. Then
secure the screws with the Philips screwdriver.
USING THE RADIO
Follow these steps to use the radio.
1. Turn VOLUME clockwise until it clicks to turn on the radio.
2. Set BAND to FM or AM.
3. Turn TUNING to the desired station.
4. Adjust VOLUME to a comfortable listening level.
5. Turn VOLUME counterclockwise to OFF to turn off the radio.
USING THE HORN
You can sound the horn even when the radio is on. To sound the horn,
press the orange button on the front panel.
