background image

 
AM/FM Cassette Car Stereo w/22 Watts x 2 Max Power 
(120-2130A)                Operation                  Faxback Doc. # 60664 
 
Using The Controls 
 
When you listen to your stereo, adjust the following controls to suit your  
listening preferences.  
 
             VOLUME and ON/OFF knob           BALANCE knob (PULL out) 
             TONE Knob                        TUNING knob  
             FADER knob 
 
    ON VOL - Turn the left inner knob clockwise until you hear it click to 
             turn on the stereo.  Continue to turn the knob clockwise to 
             increase the volume. Turn the knob counterclockwise to reduce 
             the sound or until you hear it click to turn off the stereo.  
 
             WARNING: To protect your hearing, do not listen at high 
                      volume levels. Slowly increase the volume to a 
                      comfortable listening level. 
 
    0 TONE - Turn the left outer knob to adjust for the best treble and 
             bass balance.  Turning it clockwise reduces the base while 
             turning it counter clockwise reduces the treble. 
 
   FADER 0 - Turn the right outer knob for the desired balance between the 
             front and rear speakers. 
 
             Note: If you have only one set of speakers and connected them 
                   to the front speaker wires, turn FADER fully clockwise. 
 
BAL (PULL) - Pull the left inner knob until it locks. Turn it clockwise or 
             counterclockwise to adjust balance between the left and right 
             speakers.  Push the knob in to retain the setting. 
 
    TUNING - Turn the right inner knob in either direction to select the 
             desired AM or FM station. 
 
Setting The Clock 
 
Note: The clock appears on the display even when the stereo is turned off. 
      To set the clock, you must turn on the stereo. 
 
1.  Turn on the stereo and the radio station frequency appears.  After 5  
    seconds, the clock reappears on the display. 

Summary of Contents for 120-2130A






















Reviews: