background image

current disc plays repeatedly. 
 
Press REPEAT again to end repeat play. 
 
Shuffle Play 
 
Press SHUFFLE.  SHUFF appears, and the tracks on the current disc play in 
random order.  When all tracks on the current disc have played, they play 
again in a different order. 
 
Hold down SHUFFLE for three seconds or more.  DISC SHUFFLE appears and all  
the tracks on a randomly-selected disc are played in random order.  When 
all tracks on that disc have played, all the tracks on a different  
randomly-selected disc play.  This continues until all tracks on all discs  
in the CD magazine have played.  Then shuffle play stops. 
 
Press SHUFFLE again to end shuffle play. 
 
Switching Between The CD Player And The Radio 
 
If you connected the Audio Adapter's antenna plug to your sound system's  
antenna jack and you want to listen to the radio, turn off the CD changer,  
then tune the radio to the station you want to hear. 
 
Note:  If you do not stop or turn off the CD changer, the CD continues to  
       play while you listen to the radio.  
 
To return to the CD, tune the radio to the same FM frequency as the  
89.1/88.7 MHz setting on the FM modulator. 
 
Resetting The Audio Adapter 
 
If the CD changer displays an error code (Err 1-Err 10), locks up, or does  
not work properly, press the hole on the bottom of the Audio Adapter  
marked RESET with a pointed object, such as a straightened paper clip, for  
1 or 2 seconds. 
 

Summary of Contents for 120-2182
























Reviews: