21
Reviewing the Programmed
Sequence
While play is stopped, repeatedly
press
PROGRAM
to review the pro-
grammed sequence. The program
number flashes, and the disc and
track number appear.
Replacing/Adding a Track in
a Programmed Sequence
Note: You can replace a pro-
grammed track or add to the end of
the sequence, but you cannot insert
a track in the sequence.
1. While play is stopped, repeat-
edly press
PROGRAM
until the
number you want to replace or
the first empty program space
(
DISC
–
,
TRACK
–
–
) appears.
2. Select the CD containing the
new track.
3. Press
SKIP/TUNING
⁄
or
Ÿ
on
the system (or
SKIP/TUNING
Down
or
Up
on the remote
control) until the desired track
appears on the display.
4. Press
ENTER
. The new track
replaces the previous track or is
added to the end of the pro-
grammed sequence.
Clearing the Programmed
Sequence
To clear the entire programmed se-
quence, press
OPEN/CLOSE
while
the CD is stopped.
VIEWING THE TIME
REMAINING AND
ELAPSED
You can view the remaining and
elapsed time of a track or CD at any-
time during CD playback.
While a CD is playing, press
TIME
on
the system.
REMAIN
and the re-
maining time of the current track
appear.
Press
TIME
on the system again.
TOTAL
and the elapsed playing time
of the current CD appear.
Press
TIME
on the system once
more.
TOTAL
,
REMAIN
, and the
remaining time of the current CD
appear.
Press
TIME
on the system again to
return to the normal display.
13-1289.fm Page 21 Wednesday, July 14, 1999 6:09 PM
