17
Remote Opera
tion
3. Enter a remote command. See
“Remote Commands” on Page 17.
If you forget to turn your system on, you
can phone in from a remote location
and turn it on automatically.
1. Call your telephone number.
2. The system answers after 10 rings.
After the beep, enter your 3-digit
security code.
3. After the second beep, press
9
then hang up. Subsequent
messages will be recorded.
4
'/16'
"
%
1//#0&5
2TGUU
<
6Q
If there are no new messages, you hear three
beeps.
2 #
Play all messages.
2 5
Play new messages.
3 #
Delete all old messages.
7 #
Record new outgoing
message.
7 #
Stop recording outgoing
message.
8 #
Record memo.
8 #
Stop recording memo.
9 #
Turn system off/on.
0 #
Monitor the room..
±
"
016'
"
±
"
Care
Keep the system dry; if it
gets wet, wipe it dry
immediately. Use and
store the system only in
normal temperature
environments. Handle the
system carefully; do not
drop it. Keep the system
away from dust and dirt,
and wipe it with a damp
cloth occasionally to keep
it looking new.
If your system is not
performing as it should,
take it to your local
RadioShack store for
assistance. To locate your
nearest RadioShack, use
the store locator feature
on RadioShack's website
(www.radioshack.com), or
call 1-800-The Shack
(843-7422) and follow the
menu options. Modifying
or tampering with the
system's internal
components can cause a
malfunction and might
invalidate its warranty and
void your FCC
authorization to operate it.
