37
Operation
not, set up your entertainment devices (see “Setting Up
The Remote” on Page 23).
USING CHANNEL SCAN
If you have not programmed your remote for Favorite
Channel Scan, you can use
SCAN
to scan all channels of
the desired device.
Press
SCAN
to begin scanning. To stop scanning on the
desired channel, press
SCAN
again.
Important: If you program Favorite Channel Scan, you
can no longer use
SCAN
for Channel Scan. If you want to
use the remote for Channel Scan after you have pro-
grammed it for Favorite Channel Scan, you must reset
the entire operation of the remote (see “Using Operation
Reset” on Page 44). You lose all stored information.
USING FAVORITE CHANNEL SCAN
Select the desired device using the mode keys. Then
aim the remote control at the device and press
SCAN
.
Previews of your favorite channels at 3-second intervals.
Press
SCAN
again to stop the scan on a desired chan-
nel.
USING A MACRO
Aim the remote control at the devices and press the pro-
grammed macro key (see “Programming Macros” on
Page 28).
Mode Key
Default Brand (Model)
TV
RCA (T0047)
VCR/DVD
RCA (V0060)
CAB/SAT
RCA (C0476)
RECVR
Pioneer (R1023)
AUX 1
Panasonic TV (T0250)
AUX 2
Pioneer DVD (Y0525)
AUX 3
RCA SAT (S0566)
AUX 4
Pioneer CD (D0032)
