background image

14

Specifications

Supported Equipment ..................TV/DVD/STB/VCR/CBL
Power ..........................................................2 AAA batteries
Battery life ................................................up to 120,000 hrs

Specifications are subject to change and improvement without notice. 

Actual product may vary from the images found in this document.

FCC Information

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. 
• Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

• Consult your local 

RadioShack

 store or an experienced radio/TV techni-

cian for help.

If you cannot eliminate the interference, the FCC requires that you stop 
using your equipment. Changes or modifications not expressly approved 
by 

RadioShack

 may cause interference and void the user’s authority to 

operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject 
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) This device must accept any interference received, 
including interference that may cause undesired operation.

Summary of Contents for 15-310

















Reviews: