3
Connect each device’s S-video outputs to a set of
INPUT
(1-4)
S-video
jacks on the switch box.
2.
Connect the TV or monitor’s Y/Pb/Pr component video
inputs to
OUTPUT Y/Pb/Pr
component video jacks.
– OR –
Connect the TV or monitor’s composite video inputs to
OUTPUT
composite video jacks.
– OR –
Connect the TV or monitor’s S-video
inputs to
OUTPUT S-video
jacks.
Power
Connect the supplied AC adapter’s barrel plug to the selector
switch’s
DC 12V
jack, then connect the adapter’s AC plug to a
standard AC outlet.
w
Caution:
• You must use a Class 2 power source that supplies 12V
DC and delivers 300 mA. Its center tip must be set to
negative and its plug must fit the switchbox’s
DC 12V
jack.
The supplied adapter meets these specifications. Using
an adapter that does not meet these specifications could
damage the switchbox or the adapter.
• Do not place the selector switch on the top of a TV or other
electrical appliance. Electromagnetic interference from the
TV might distort the sound from any devices connected to
the switchbox.
