background image

6

•  If you hear a popping sound when you place the 

receiver on top of your TV, move the receiver until the 
popping sound disappears.

•  S-Video connectors have a special orientation, when 

you want to use S-Video connection, carefully handle 

the connector, and make sure the orientation is 
correct. Push it gently, otherwise, you will break the 
connector and connector socket of device.

•  Be sure the RCA cable’s plug colors correspond with 

the receiver or transmitter and A/V device jacks: white 
for audio left, red for audio right, yellow for video.

•  For optimum performance and reception, keep 

the transmitter and receiver away from wireless 
LAN access points, microwave ovens, and wireless 
networks or phones that run on 5.8GHz frequency.

•  Rotating the antenna on either the receiver or 

transmitter 360

o

 or more may cause damage.

•  Unplug the AC adapters from the AC outlet before 

unplugging it from the transmitter or receiver.

•  Use the supplied AC adapters only. Using an AC 

adapter not designed for this product may cause 
damage. 

15-332 -EN 033110.indd   6

4/6/2010   5:25:10 PM

Summary of Contents for 1500332

















Reviews: