2
We hope you enjoy your 3-In / 2-Out HDMI Matrix Splitter /
Selector from RadioShack. This HDMI matrix splitter / selector
connects three HDMI input devices to two separate HDMI
display devices. It enables you to send the same source to
both displays, or a different source to each. Supports Full
1080p resolution,3D format (12 Bit) and 4K resolution (Ultra
HD). Please read this user’s guide before using your HDMI
matrix splitter / selector.
Package Contents
• HDMI Matrix Selector • AC Adapter
• Remote Control • One 3V, CR2025 Battery (installed)
• User’s Guide
Caution:
Only use the supplied AC adapter. Using an adapter
that does not meet the selector’s specifications could
damage the selector.
Specifications
Video Amplifier Bandwidth ................................340 MHz/3.4 Gbps
Vertical Frequency Range
.............................................25 – 340MHz
Signal Link Range ................................ Max. 1080p 3D @ 60Hz and
..................................................................4K × 2K @ 30Hz from source
HDMI Input Connector ..........................................Type A 19-Pin × 3
HDMI Output Connector ......................................Type A 19-Pin × 2
Power Consumption ................................................................ Max. 5W
Power ...................................................... Splitter/Selector: 5V DC 1A
..................................................................................Remote Control: 3 V
AC Adapter ............................Input: 100 – 240 V 50/60 Hz 300 mA
............................................................................................Output: 5 V 1 A
Dimensions (L×W×H) ..................4.1×8.7×1.5 in (104×221×37mm)
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
