4
Install the Battery
Before using the remote control
for the first time, pull out the clear
plastic tab.
Replace the battery when your
remote control is not working normally.
1.
Press the tab on the battery compartment tray inward
and slide the battery compartment tray out.
2.
Insert the supplied 3V, CR2025 battery, positive (+) side
up.
3.
Slide the tray back into the battery compartment until it
clicks.
Battery Notes:
• Keep button-cell batteries away from children. Swallowing
a button-cell battery can be fatal.
• Dispose of batteries promptly and properly. Do not burn
or bury them. Use only a fresh battery of the required size
and type.
Use Your Devices
1.
Press and hold
G
for 3 seconds
to turn on the selector.
2.
Press
SELECT OUTPUT 1
or
OUTPUT 2
buttons on the
selector, or press
Set
A
or
Set
B
on the remote control,
to activate the display devices.
3.
The selector scans for the most recently used input
device. If an input port contains no device, the selector
will move to the next port automatically.
To switch between input devices, press
SELECT
OUTPUT 1
or
OUTPUT 2
buttons on the selector, or
press
IN 1
,
IN 2
, or
IN 3
on the remote control. Your
display device screens go blank as the selector scans
