12
OPERATION
TURNING THE TV
ON/OFF
Press
POWER
on the TV’s front panel
or remote control to turn the TV on or
off.
SETTING THE ON-
SCREEN LANGUAGE
1. Press
SET-UP
on the remote con-
trol or
FUNCTION
on the front
panel until
LANGUAGE
appears
on the screen.
2. Press
VOL
+
or – so the arrow
points to
ENGLISH
or
ESPANOL
(Spanish).
3. The on-screen display automati-
cally clears in about 5 seconds.
Or, you can press
RECALL
to
clear it.
All on-screen displays are now in
the selected language.
SELECTING THE INPUT
SIGNAL
Follow these steps to select between
receiving cable stations and receiving
broadcast channels.
1. Press
SET-UP
on the remote con-
trol or
FUNCTION
on the front
panel until
INPUT
SELECTION
appears on the screen.
Note: When you press
SET-UP
on
the remote control,
VIDEO
does
not appear as a selection. Press
TV/VIDEO
on the remote control to
select
VIDEO
(see “Selecting TV
or Video” on Page 13).
2. Press
VOL
+
or – so the arrow
points to
AIR
,
CABLE
, or
VIDEO
.
Select
AIR
if you are using an an-
tenna or
CABLE
if you are using a
cable service. Select
VIDEO
to
view the audio/video source con-
nected to the TV’s input jacks.
3. The on-screen display automati-
cally clears in about 5 seconds.
Or, you can press
RECALL
to
clear it.
16-289.fm Page 12 Tuesday, July 20, 1999 10:57 AM
