14
O
perat
ion
5. Adjust
VOLUME
to a comfortable listening level.
6. To stop playing a disc, press
STOP
D
.
Ô
7. Press
EJECT
to remove the disc from the player.
8. To turn off the Travel Theater, press
POWER
º
.
P
ROGRAMMING
TV C
HANNELS
1. Press
POWER
º
.
2. Press
TV/DVD/AUX
on the remote or
TV/AUX
on the
Travel Theater to select TV mode.
3. Press
TV/CATV
on the remote to select regular
broadcast TV or cable TV (Standard Cable, HRC
Cable, and IRC Cable).
4. Press
AUTO MEMORY
on the remote or
PROG.
on the
Travel Theater. All available channels are searched
and tuned. Channels with signals detected are
automatically stored.
5. Repeatedly press
SKIP/SEARCH
to turn
SKIP
on or off.
If
SKIP
is on, when you use
d
CHANNEL
e
or
CH+/CH–
to scroll through channels, the TV stops only on
channels that were stored into memory. If
SKIP
is off,
the TV searches and stops at all available channels.
6. To manually store a TV channel, tune to that channel
and press
ERASE/WRITE
until
MANUAL MEMORY ADD
appears on the screen.
To erase a channel from memory, tune to that channel
and press
ERASE/WRITE
on the remote until
MANUAL
MEMORY ERASE
appears on the screen.
WATCHING TV
1. Press
d
CHANNEL
e
on the Travel Theater or
CH+/CH–
on the remote to tune to the desired channel. You can
also use the number buttons to manually enter the
channel number.
2. To adjust the volume, press
d
VOLUME
e
on the Travel
Theater or
VOL +/ VOL–
on the remote.
Ô
NOTE
Ô
When you stop playing a disc, the
Travel Theater remembers where
you stopped. When you press
PLAY
g
to start playing the disc
again, the Travel Theater picks up
where you left off unless you press
STOP
D
, eject the disc, or turn off
the Travel Theater.
