17
Searching
Note:
If the same frequency already exists
on another channel, the scanner beeps and
displays that channel. Press
CL
to cancel, or
press
ENT/PGM
to store the frequency in
both channels.
Search Skip Memory
You can skip up to 50 unwanted frequencies
during a limit search, fine tune, service bank, or
Signal Stalker I search.
Note:
You cannot skip frequencies during
WX service search.
To skip a frequency, press
L/O
when the scanner
stops on the frequency during a search. The
scanner stores the locked-out frequency in
memory and automatically resumes the search.
To clear a single frequency from skip memory:
1.
Press
PSE
to stop the search.
2.
Press
T
or
S
to select the frequency.
L/O
appears.
3.
Press
L/O
.
L/O
disappears.
To clear all skipped frequencies at once:
1.
While searching, press
PSE
.
2.
Hold down
L/O
until the scanner beeps twice.
Notes:
•
If you selected all frequencies to be skipped
within the search range, the scanner beeps
3 times and does not search.
•
If you select more than 50 frequencies
to skip, each new frequency replaces a
frequency previously stored, beginning with
the first stored frequency.
•
Press
T
or
S
to select a skipped frequency
during pause.
L/O
appears when you select
a skipped frequency.
Summary of Contents for 20-135
Page 38: ...38 Additional Information Notes...
