21
Scanning
Scanning
Scanning Stored Channels
Press
SCAN
to begin scanning your programmed
frequencies.
SCAN
appears and the scanner scans
through all non-locked channels in the activated
banks.
Select any combination of banks to scan by
pressing the corresponding number keys. The
bank numbers appear at the top of the display.
The bank number which is currently being
scanned blinks.
When the scanner finds a transmission, it stops
on it. When the transmission ends, the scanner
resumes scanning. If it is a long transmission and
you want to move on, press
SCAN
to resume
scanning.
If you press
PSE
when the scanner stops on a
transmission, the scanner goes to manual mode.
Press
PSE
or
SCAN
to resume scanning.
Notes:
•
If you have not stored any frequencies into
channels, the scanner does not scan.
•
If the scanner picks up unwanted partial,
or weak transmissions, turn
SQUELCH
clockwise to decrease the scanner’s
sensitivity to these signals.
•
To listen to a weak or distant station, turn
SQUELCH
counterclockwise.
•
To ensure proper scanning, adjust
SQUELCH
until the audio mutes.
Summary of Contents for 20-135
Page 38: ...38 Additional Information Notes...