7
Scanner Setup
Installing Batteries
1.
Remove the battery compartment cover.
2.
Set the
Battery Switch
inside the battery
compartment to the appropriate setting:
•
ALKALINE
when using alkaline batteries.
•
Ni-MH
when using rechargeable (Ni-MH)
AA batteries.
3.
Insert two AA batteries (not included) into the
battery compartment and two AA batteries
into the battery compartment cover, matching
the polarity symbols (+ and -) marked inside.
4.
Replace the cover.
Battery Switch
Warning:
Only set the
Battery Switch
to
Ni-
MH
for use with nickel metal hydride (Ni-MH)
rechargeable batteries.
Never use non-rechargeable batteries when the
switch is set to Ni-MH.
Summary of Contents for 20-135
Page 38: ...38 Additional Information Notes...