30
Searching
memory is deleted and the new frequency
is stored in that channel. You can scan the
log channels along with the normal 1000
channels.
•
The 10 log channels are located after Bank 19
Channel 49 and you can manually access them
by selecting channels as Bank 20 Channel 00,
Bank 20 Channel 01, ... Bank 20 Channel 09.
The channel numbers appear as SS-0, SS-1, ...
SS-9.
•
You cannot program frequencies in the log
channels.
•
You can lock out the log channels like
normal channels.
•
The scanner stores signals found by the
Signal Stalker I even if the logging option is
set to off.
•
The frequencies in the log channels are
deleted when the scanner is turned off.
Signal Stalker I Band Meter
The band meter allows you to see which band
Signal Stalker I is searching for. When a strong
and consistent signal is detected, this meter will
rise up to Max. The scanner tunes to the signal
and shows the band where the signal is detected.
However, even if this meter rises to Max, the
scanner might not be able to catch the signal if
it is out of range, locked-out, or screened as a
common pager frequency.
To improve performance, disable the band
by pressing the band number on the keypad.
Alternatively, disable the band within the Band
Switch in the Signal Stalker I options menu.
Note:
This feature is different from
SIGNAL STRENGTH METER using RSSI.
