52
Trunk Scanning
assigned Talk Group IDs just like other users, you
may want to lock out reception of these signals.
The scanner allows that you lock out up to 50 Talk
Group IDs for each trunk scanning bank. If you
use all the banks as trunking banks, you can lock
out up to 1000 IDs at one time.
Note:
If you lock out an ID, it is also
locked out of the scan lists. See
“Using Talk
Group ID Lists”
on p. 56
To lock out an ID, press
L/O
when the ID appears.
The ID is locked out, and the next active ID
appears.
When you try to lock out more than 50 Talk Group
IDs in a bank,
“ID L/O List Full”
appears.
You can also lock out talk group IDs from the ID
Programming Mode.
1.
Press
ENT/PGM
then
TRUNK/MODE
to enter
the ID Programming Mode.
2.
Press
FUNC +
T
or
S
to select the desired
bank.
3.
Press
T
or
S
to select the ID memory.
4.
Press
L/O
to lock out the ID.
L/O
appears.
Unlocking Locked-Out Talk Group IDs
To remove the lockout from a talk group ID,
manually select the ID memory, and press
L/O
.
L/O
disappears.
To review and unlock lockouts in a bank:
1.
Press
ENT/PGM
then
TRUNK/MODE
to enter
the ID Programming Mode.
2.
Press
FUNC
, and then press
L/O
.
3.
Select Review ID L/O and press
ENT/PGM.
4.
If you want to unlock a locked-out ID, select
it and press
ENT/PGM.
Select Yes and press
ENT/PGM.
