64
Trunk Scanning
4. Select the block and press
ENT/PGM.
5.
Select the size code supplied with the Type I
system information and press
ENT/PGM
.
6.
Repeat steps 4 and 5 for each block.
7.
Make sure each entry is correct.
Notes:
•
The default setting of the bank is Motorola Type II.
•
However, if you set Type I and you want to
return to Type II, enter 15 at Step 5.
•
If you cannot find your fleet map information,
try the preset fleet maps (See
“Appendix B: Fleet
Maps”
on p. 80
for a description of the preset
fleet map).
Setting Control Channel Only Mode
When this function is activated, trunking is
performed using Control Channel data only.
Voice channel frequencies do not have to be
programmed into memory. This feature only
applies to Motorola 800 MHz, 800 MHz Custom,
900 MHz, VHF, UHF systems.
To turn this function on or off:
1.
Press
FUNC + MAN/MENU
to open Menu Mode.
2.
Select
Trunk Option
, then press
ENT/PGM.
Press
T
or
S
to select a bank, then press
ENT
.
3.
Select
MOT
, then press
ENT/PGM.
4.
Select
Set C-Ch Only
, and press
ENT/PGM.
5.
Select
On
or
Off
and press
ENT/PGM.
