66
Trunk Scanning
Setting the Disconnect Tone Detect Function
When the Motorola disconnect tone detect
function is disabled, the scanner looks for squelch
before returning to the control channel instead
of waiting for the disconnect tone. Only in rare
instances will you need to adjust the default
settings. The condition to return to control
channels depends on whether the signal is
present or not.
1.
Press
FUNC + MAN/MENU
to open Menu Mode.
2.
Select
Trunk Option,
then press
ENT/PGM.
Press
T
or
S
to select select a bank, then press
ENT/PGM.
3.
Select
MOT,
and press
ENT/PGM.
4.
Select
Set End Code,
and press
ENT/PGM.
5.
Select
Yes
or
Ignore,
and press
ENT/PGM.
Note:
If you set the squelch so you hear
a hissing sound when you set
ignore
,
the scanner will remain on the voice
channel, even when a disconnect tone is
transmitted or there is no signal at all.
EDACS Talk Groups
Selecting the EDACS Talk Group ID Format
Your scanner can enter or display EDACS talk
groups in decimal format (1-2047).
1.
Press
FUNC + MAN/MENU
to open Menu
Mode.
2.
Select
Trunk Option,
then press
ENT/PGM.
Press
T
or
S
to select a bank, then press
ENT/PGM.
3.
Select
EDCS,
and press
ENT/PGM.
4.
Select
EDCS ID Format,
and press
ENT/PGM.
3.
Select
AFS Format
or
Decimal Format,
and press
ENT/PGM.
