1
1
The.application.software.is.also.available.online.
at.www.starrsoft.com.and.www.scancat.com.
To clone the scanner data:
1.. Turn.on.both.scanners.
2.. Connect.the.connecting.cable.
to.each.scanner’s.PC/IF.jack..**.
CLONE.MODE.**.appears.
3.. Press.
. “Confirm to send data?” appears.
4.. Press.1.to.send.the.data.to.the.other.unit.or.
press.any.other.key.to.cancel..
5.. To.exit.the.clone.mode,.remove.the.cable.
“CLONE MODE Incorrect Model” appears
if you connect a scanner other than a
PRO-164 (or PRO-163).
Searching
You.can.search.for.transmissions.using.the.
preprogrammed.search.bank,.which.is.divided.
into.eight.search.bands..
Seek Search
When.Seek.Search.is.active,.the.scanner.stops.
on active frequencies for five seconds and then
resumes.searching.automatically..
To activate Seek Search:
1.. Press.FUNC.then.7..“Seek.Search.ON”.
appears briefly and “S” appears on the
display.
2.. To.turn.off.Seek.Search,.press.FUNC.then.7.
again. “Seek Search OFF” appears briefly.
Search Banks
To search preprogrammed search banks:
1.. Press.SRCH.repeatedly.to.select.a.bank..
Bank
Band
SR0
Marine
SR1
CB
SR2
FRS/GMRS/MURS
SR3
Public.Safety
SR4
Aircraft
SR5
Amateur.Bands
SR6
Railroad
SR7
Limit.search.(User.changeable)
.
For.SR0-SR2,.you.can.directly.select.a.
channel.or.search.through.the.band.
.
SR3.to.SR5.banks.contain.several.groups..
To.turn.off.a.group,.press.the.group.
number;.the.group.number.disappears..To.
turn.the.group.back.on,.press.the.group.
number.again.
2.. Adjust.the.Squelch..After.the.set.delay,.the.
scanner.starts.searching..When.the.scanner.
finds an active frequency, it stops searching.
3.. To.pause.while.searching,.press.PSE..The.
scanner.stops.searching.and.***.PAUSED.
***.appears..To.resume,.press.PSE.again.
4
.. If.the.scanner.stops.on.an.unwanted.
frequency,.you.can.press.L/OUT.to.lock.out.
the.frequency.
PC/IF
.—.PC.interface.
cable.for.use.with.
your.computer.