21
ADDITIONAL FEATURES
CONNECTING
HEADPHONES
For private listening and for stereo
sound during FM stereo broadcasts,
you can connect optional stereo head-
phones with a
1
/
8
-inch plug. Your local
Radio Shack store sells a wide selec-
tion of stereo headphones.
Insert the headphones’ plug into the
receiver’s
jack. This disconnects
the receiver’s internal speaker.
When you connect stereo headphones
and tune to a stereo broadcast,
appears on the display. For the best
reception, fine tune the receiver until
remains steady.
Listening Safely
To protect your hearing, follow these
guidelines when you use headphones.
• Set the volume to the lowest set-
ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
LIGHTING THE DISPLAY
Press
LIGHT
to briefly light the display.
The display light automatically turns off
about 15 seconds after you release
LIGHT
. Press
LIGHT
again to turn it off
sooner.
ST
ST
20-219.fm Page 21 Wednesday, August 4, 1999 9:23 AM