16
Press
to lock all the front panel
buttons and
ROTARY TUNING
.
ap-
pears.
You can still adjust
VOLUME
,
TONE
,
and other controls.
To unlock the buttons, press
again.
disappears.
SETTING AND VIEWING
THE LOCAL TIME
Your receiver has two clocks. One dis-
plays your local time and the other lets
you display the time in any of 42 preset
world cities or a world city you specify.
Once you set your local time, the re-
ceiver automatically calculates the cor-
rect time in each of the preset world
cities or a world city that you specify
and lets you select and display that
time.
The time zone map on the back of the
receiver shows the difference in hours
between UTC (Universal Time Coordi-
nate — formerly called Greenwich
Mean Time) and each time zone. To
determine your local time from UTC,
add or subtract the specified number
from UTC time. During Daylight Saving
Time, add one more hour.
The clock display shows a random
time when you install batteries. Follow
these steps to set the local time in the
24-hour format (0:00 – 23:59).
1. Repeatedly press
WORLD/HOME
until
flashes.
2. Rotate
MANUAL TUNING
until the
name of your city (or a city in the
same time zone) appears, then
press
ENTER
.
The
receiver
beeps and the city’s name ap-
pears for 2 seconds then disap-
pears.
and the time ap-
pear on the display.
3. Press
SET
.
flashes.
4. While
flashes, use the
number buttons to enter the cor-
rect time.
Notes:
• If
stops flashing before
you press a number button,
start again at Step 3.
• Do
not
precede single-digit
hours with a 0. For example,
enter
930
for 9:30 AM.
• If you make a mistake, press
C
to erase the last digit, then
enter the correct digit.
M
M
HOME
HOME
HOME
HOME
HOME
Summary of Contents for 20-228
Page 47: ...47 NOTES...
