S
e
ar
c
h
in
g
th
e O
n
e To
u
c
h B
a
nk
s
28
3. Press
TUNE/CLEAR
to start
tune.
#j#
#j#
#j#
#j#
appears.
4. Hold down
H
or
G
for about 1
second to tune up or down.
H
or
G
appear and the scanner
searches the frequencies.
When the scanner finds an
active frequency, it stops
searching and displays the
frequency's number.
±
5. To search for another active
frequency, hold down
H
or
G
for about 1 second.
Once you find interesting
frequencies during the search, you
can store them in the scanner’s
channel-storage banks. Frequen-
cies found during tune search are
automatically assigned to channel-
storage banks 9 and 10.
1. To store the displayed fre-
quency in the lowest available
channel in the assigned
banks, press
ENT
. The
channel number flashes.
2. Press
ENT
again to store the
frequency. The channel and
frequency flash twice. If you
want to cancel the operation,
press
TUNE/CLEAR
instead of
ENT
. After storing the frequen-
cy, the scanner continues to
search for frequencies.
±
5ECPPKPI
"
VJG
"
5VQTGF
"
%JCPPGNU
To set the scanner to continuously
scan through all channels with
stored frequencies, repeatedly
press
SCAN
until
I97D
I97D
I97D
I97D
and
H
appear. The scanner rapidly scans
until it finds an active frequency.
±
"
016'
"
±
"
•
If there is no empty
channel,
Xý/ý'&ý
Xý/ý'&ý
Xý/ý'&ý
Xý/ý'&ý
#<KBB
#<KBB
#<KBB
#<KBB
appears
after you press
ENT. To store
more frequencies,
you must clear
some channels.
See “Clearing a
Stored Channel”
on Page 30. To
continue tuning
after
Xý/ý'&ý#<KBB
Xý/ý'&ý#<KBB
Xý/ý'&ý#<KBB
Xý/ý'&ý#<KBB
appears, press
TUNE/CLEAR.
•
If you entered a
frequency that is
already stored in
another channel,
#ZKFB#
#ZKFB#
#ZKFB#
#ZKFB#
(duplicate)
and the lowest-
numbered channel
containing the
duplicate
frequency flash for
about 3 seconds. If
you want to store
the frequency
anyway, press
ENT again. You
can then delete the
frequency later.
See “Clearing a
Stored Channel”
on Page 30.
20-315.fm Page 28 Wednesday, July 24, 2002 2:27 PM
