24
Basic Oper
ation
Reviewing and Removing Lock-outs
Stored Channels
1.
Hold down
L/O
/
L/O RV W
for about two seconds while in manual
operation. The scanner pulls up a list of locked out channels.
2.
Repeatedly press and hold
L/O
/
L/O RV W
to show the next locked out
channel. If an error beep sounds, there are no locked out channels.
.
To remove the lock-out, press
L/O
/
L/O RV W
until
L/0
disappears.
Marine Service Bank
1.
Press
PSE
during the Marine Service Bank search.
2.
Hold down
L/O
/
L/O RV W
for about two seconds. The scanner pulls up a
list of locked out channels.
.
Repeatedly press and hold
L/O
/
L/O RV W
to show the next locked out
channel. If an error beep sounds, there are no locked out channels.
4.
To remove the lock-out, press
L/O
/
L/O RV W
until
L/0
disappears.
Other Service Banks
1.
Hold down
L/O
/
L/O RV W
for about two seconds during a Service Bank
search.
2.
Press
e
or
d
repeatedly to scroll through the list of locked-out frequencies.
L-r
and
L/0
appear in the display.
.
Press
L/O
/
L/O RV W
to remove the lock-out. The list scrolls to the next
locked-out frequency.
n
Notes:
• When you reach the highest locked-out frequency, the scanner beeps twice
and rolls to the lowest locked-out frequency.
• If the
Service Bank
has no locked-out frequencies,
EMPty
appears.
Removing Lock-outs from All Frequencies in a Service Bank
1.
Hold down
L/O
/
L/O RV W
for about two seconds during a Service Bank
search.
L-r
appears.
2.
While holding down
TUNE/CLEAR,
press
L/O
/
L/O RV W
.
FLo ALL
–
CL
appears for about two seconds. Then the display alternates with
YES
---
Ent
and
No
--
CLEAr
.
.
Press
ENT
.
L-r EMPty
appears. The scanner clears lock-outs from all
frequencies in the Service Bank.
