21
MOVING A FREQUENCY
FROM A MONITOR
MEMORY TO A
CHANNEL
1. If the scanner is scanning, press
MANUAL
.
2. Use the number keys to enter the
channel number where you want
to store the monitor frequency,
then press
PROGRAM
.
PGM
appears on the display.
3. Press
MONITOR
. The channel
number flashes.
4. Use the number keys to enter the
monitor memory number that has
the frequency you want to store
into the channel. The frequency
appears.
5. Press
E
. The scanner stores the
frequency in the selected channel.
DELETING A
FREQUENCY FROM A
CHANNEL
1. If the scanner is scanning, press
MANUAL
.
2. Use the number keys to enter the
channel number containing the
frequency you want to delete.
3. Press
PROGRAM
.
4. Press
0
then
E
. The frequency is
deleted from the channel.
To delete a frequency from a monitor
memory, store a new frequency in that
monitor memory.
SCANNING CHANNELS
Note: You cannot scan channels until
you have stored frequencies in them.
To scan channels stored in the
channel-storage banks, press
SCAN
.
The scanner scans through all chan-
nels in the active banks.
CH
CH
CH
20-419.fm Page 21 Wednesday, March 24, 1999 2:43 PM