25
LISTENING TO THE MONITOR MEMORY
The scanner has one monitor memory. You can use this memory to
temporarily store a frequency while you decide whether to store it into a
channel. This is handy for quickly storing an active frequency when you
search through an entire band. Once you have temporarily stored a fre-
quency into the scanner’s monitor memory, you can listen to it by press-
ing
MANUAL
then
MON/0
.
MOVING A FREQUENCY FROM THE
MONITOR MEMORY TO A CHANNEL
Follow these steps to move a frequency stored in the monitor memory
to a permanent channel.
1. Press
MANUAL
.
MAN
appears on the display.
2. Enter the number for the channel where you want to store the
monitor frequency. The channel number appears on the display.
3. Press
MANUAL
. The frequency currently assigned to that channel
appears.
20-508.fm Page 25 Wednesday, August 4, 1999 1:50 PM