45
3. Press
ENT
. The scanner clears any lockouts from all fre-
quencies in all service banks. Or, if you do not want to
clear the lockouts, press
MON/CL
.
USING PRIORITY
The priority feature lets you scan through channels and still not
miss important or interesting calls on a frequency you select.
You can program one frequency into the priority channel. As
the scanner scans, if the priority feature is turned on, the scan-
ner checks the priority channel for activity every 2 seconds.
1. Press
PGM
, then press
PRI/ALERT
.
PCH
and
000.000
or
the previously-stored frequency appear.
2. Enter the frequency you want to enter into the priority
channel, then press
ENT
. The display flashes twice.
If you listen to a channel or frequency and you want to move
this frequency to the priority channel, hold down
ENT
then
press
PRI
.
PCH
and the frequency flash twice.
Notes:
• You cannot move a frequency to the priority channel while
the scanner is in its programming mode.
• Wait until
PCH
and the frequency stop flashing before
pressing additional keys.
To turn on the priority feature, press
PRI/ALERT
during scan-
ning.
PRI
appears. The scanner checks the priority channel
every 2 seconds and stays on the channel if there is activity.
PCH
and the frequency appear whenever the scanner is set to
the priority channel.
To turn off the priority feature, press
PRI/ALERT
.
PRI
disap-
pears.
Note: If you program a weather frequency into the priority
channel and the scanner detects a WX alert tone on that fre-
quency (see “WX Alert” on Page 36), the scanner sounds the
alert tone and
ALErt
flashes. Press any key to turn off the
alarm.
Summary of Contents for 20-514
Page 63: ...63 NOTES...
