16
AUDIO MODES
While the detector is sounding a radar or Safety Warn-
ing System alert, you can press
AUD
to temporarily
silence it. The detector returns to normal operation after
the radar signal stops.
You can change the alert pattern to sound several X-,
K-, or Ka-tones followed by muted clicking by pressing
AUD
when no alert is sounding. The clicking becomes
more rapid as the radar signal strength increases.
Press
AUD
again to return to normal operation.
TURNING ON SAFETY WARNING
SYSTEM AND VG-2 DETECTION
You can turn the Safety Warning System and VG-2
detection on and off to suit your needs. Follow these
steps to change these features.
1. With the detector off, press and hold
CTY
, then
press
P/V
. The yellow
X
indicator and
1
turn on and
the detector sounds a short beep when you release
the buttons.
2. If
1
is flashing, Safety Warning System detection is
turned off. Press
AUD
to turn the feature on (not
flashing) or off (flashing).
3. Press
CTY
.
2
turns on.
22-1660.fm Page 16 Friday, August 6, 1999 9:38 AM