9
U
SING
Q
UIET
C
ODES
Quiet Codes let you talk and listen to
other radios set to the same channel
and CTCSS (quiet code). This is similar
to having a sub-channel within a
channel, giving you greater
communication flexibility. When you set
a quiet code (there are 38 codes to
choose from) and turn on this feature,
you can communicate with any user
who has a radio set to the same
channel and quiet code.
1. Hold down
QUIET
until the quiet
code flashes.
2. Repeatedly press
e
/SCAN
or
d
/CALL
until you see the desired
quiet code. (See “Quiet Codes” on
Page 10 for a complete list of quiet
codes.)
Ô
3. Press
QUIET
to store the quiet
code.
4. To turn off the quiet code feature,
press
QUIET
. The quiet code
disappears.
Ô
NOTE
Ô
•
To quickly find a
quiet code, hold
down
d
/CALL until
the desired quiet
code appears, then
release
d
/CALL.
•
We recommend that
you select a quiet
code from the range
7–30. If you select a
code below or above
that range, you must
wait 1 to 2 seconds
after holding down
TALK before you
start talking.
