6
RECORDING FROM A RECEIVER/
AMPLIFIER TO ONE OR MORE
DECKS
Here’s how you would record from your receiver/ampli-
fier onto Deck 1, Deck 2, and Deck 3.
1. On your receiver or amplifier, select the desired pro-
gram source, such as the tuner.
2. Set all three of the RECORDING selectors to
SOURCE
3. Set MONITOR to SOURCE to monitor the sound
from the receiver/amplifier.
USING AN EQUALIZER
1. With an equalizer connected, set MONITOR to
DECK 3.
2. Set the DECK 3 RECORDING selector to SOURCE
if you want to equalize the signal from the receiver/
amplifier, or to DECK 1 or DECK 2 to equalize the
playback signal from either deck.
3. Press in the TAPE MONITOR button on your
receiver/amplifier and adjust the equalizer as
desired.
Note: If you want to hear an unequalized signal, press
the BYPASS switch on your equalizer or set MONITOR
to SOURCE, DECK 1, or DECK 2.
To record the equalized signal, set the DECK 1 and/or
DECK 2 RECORDING selector to DECK 3.
42-2115.fm Page 6 Wednesday, August 11, 1999 3:03 PM
